{ "currentVersion": 11.1, "cimVersion": "3.1.0", "serviceDescription": "

A Forest Order is a polygon that represents the area of a prohibition. A prohibition that is a line or point feature, such as a road closed to motor vehicle use, will be represented by a buffer of the line or point feature to create a polygon. The forest order feature class contains existing and/or future forest orders on National Forest System lands in the Intermountain Region (Region 4). This dataset is in development and may not represent all prohibition. The Alerts & Notices link at https://www.fs.usda/gov/r4 as well as the individual forest sites should be examine for the most current information.<\/p>

Title 36, Code of Federal Regulations, Chapter II, Subpart B, may close an area to entry or may restrict the use of an area by applying any or all of the prohibitions authorized by the code of regulations. These prohibitions, usually referred to as a forest order, are required to be displayed in [a] manner as to reasonably bring the prohibition to the attention of the public.<\/p>

Official documentation on this code and its subparts can be found here<\/a>.<\/p>

In order to maintain consistency across the region, a workflow has been adopted to facilitate the generation of forest order data. Each forest will maintain a forest order feature class. Through FME workbench, a regional forest order feature class will be updated daily from the forests feature classes via FME scheduler. The regional feature class is driven by the dates in the forests feature classes, which allows for collection of forest orders.<\/p>

Full Metadata is available here<\/a>.<\/p>", "mapName": "R04_Alerts_And_Closures_01", "description": "A Forest Order is a polygon that represents the area of a prohibition. A prohibition that is a line or point feature, such as a road closed to motor vehicle use, will be represented by a buffer of the line or point feature to create a polygon. The forest order feature class contains existing and/or future forest orders on National Forest System lands in the Intermountain Region (Region 4). This dataset is in development and may not represent all prohibition. The Alerts & Notices link at https://www.fs.usda/gov/r4 as well as the individual forest sites should be examine for the most current information.\n\nTitle 36, Code of Federal Regulations, Chapter II, Subpart B, may close an area to entry or may restrict the use of an area by applying any or all of the prohibitions authorized by the code of regulations. These prohibitions, usually referred to as a forest order, are required to be displayed in [a] manner as to reasonably bring the prohibition to the attention of the public.\nOfficial documentation on this code and its subparts can be found here: https://www.ecfr.gov/cgi-bin/text-idx?SID=e176a90950d0df7817d058c9ba29afd7&mc=true&node=pt36.2.261&rgn=div5#sp36.2.261.b\nIn order to maintain consistency across the region, a workflow has been adopted to facilitate the generation of forest order data. Each forest will maintain a forest order feature class. Through FME workbench, a regional forest order feature class will be updated daily from the forests feature classes via FME scheduler. The regional feature class is driven by the dates in the forests feature classes, which allows for collection of forest orders.\n\nFull metadata can be found at https://www.fs.fed.us/outernet/r4/webmaps/RegionalOffice/FO/FOMetadata.html", "copyrightText": "The USDA Forest Service makes no warranty, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, nor assumes any legal liability or responsibility for the accuracy, reliability, completeness or utility of these geospatial data, or for the improper or incorrect use of these geospatial data. These geospatial data and related maps or graphics are not legal documents and are not intended to be used as such. The data and maps may not be used to determine title, ownership, legal descriptions or boundaries, legal jurisdiction, or restrictions that may be in place on either public or private land. Natural hazards may or may not be depicted on the data and maps, and land users should exercise due caution. The data are dynamic and may change over time. The user is responsible to verify the limitations of the geospatial data and to use the data accordingly.", "supportsDynamicLayers": true, "layers": [ { "id": 0, "name": "ForestOrder", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkt": "PROJCS[\"NAD83 Albers Equal Area, Region 04, Meters\",GEOGCS[\"GCS_North_American_1983\",DATUM[\"D_North_American_1983\",SPHEROID[\"GRS_1980\",6378137.0,298.257222101]],PRIMEM[\"Greenwich\",0.0],UNIT[\"Degree\",0.0174532925199433]],PROJECTION[\"Albers\"],PARAMETER[\"false_easting\",0.0],PARAMETER[\"false_northing\",0.0],PARAMETER[\"central_meridian\",-114.0],PARAMETER[\"standard_parallel_1\",37.0],PARAMETER[\"standard_parallel_2\",43.0],PARAMETER[\"latitude_of_origin\",41.75],UNIT[\"Meter\",1.0]]", "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 2, "falseX": -16293600, "falseY": -8876600, "xyUnits": 2.764029819911189E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": -1420905.1569791283, "ymin": -836648.5675198934, "xmax": 1207342.6777314753, "ymax": 574885.9339190882, "spatialReference": { "wkt": "PROJCS[\"NAD83 Albers Equal Area, Region 04, Meters\",GEOGCS[\"GCS_North_American_1983\",DATUM[\"D_North_American_1983\",SPHEROID[\"GRS_1980\",6378137.0,298.257222101]],PRIMEM[\"Greenwich\",0.0],UNIT[\"Degree\",0.0174532925199433]],PROJECTION[\"Albers\"],PARAMETER[\"false_easting\",0.0],PARAMETER[\"false_northing\",0.0],PARAMETER[\"central_meridian\",-114.0],PARAMETER[\"standard_parallel_1\",37.0],PARAMETER[\"standard_parallel_2\",43.0],PARAMETER[\"latitude_of_origin\",41.75],UNIT[\"Meter\",1.0]]", "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 2, "falseX": -16293600, "falseY": -8876600, "xyUnits": 2.764029819911189E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": -654737.9929000009, "ymin": -647448.3892999999, "xmax": 442495.01329999976, "ymax": 442562.53690000065, "spatialReference": { "wkt": "PROJCS[\"NAD83 Albers Equal Area, Region 04, Meters\",GEOGCS[\"GCS_North_American_1983\",DATUM[\"D_North_American_1983\",SPHEROID[\"GRS_1980\",6378137.0,298.257222101]],PRIMEM[\"Greenwich\",0.0],UNIT[\"Degree\",0.0174532925199433]],PROJECTION[\"Albers\"],PARAMETER[\"false_easting\",0.0],PARAMETER[\"false_northing\",0.0],PARAMETER[\"central_meridian\",-114.0],PARAMETER[\"standard_parallel_1\",37.0],PARAMETER[\"standard_parallel_2\",43.0],PARAMETER[\"latitude_of_origin\",41.75],UNIT[\"Meter\",1.0]]", "xyTolerance": 0.001, "zTolerance": 2, "mTolerance": 2, "falseX": -16293600, "falseY": -8876600, "xyUnits": 2.764029819911189E8, "falseZ": 0, "zUnits": 1, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 0, "maxScale": 0, "units": "esriMeters", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "Layers", "Author": "", "Comments": "A Forest Order is a polygon that represents the area of a prohibition. A prohibition that is a line or point feature, such as a road closed to motor vehicle use, will be represented by a buffer of the line or point feature to create a polygon. The forest order feature class contains existing and/or future forest orders on National Forest System lands in the Intermountain Region (Region 4). This dataset is in development and may not represent all prohibition. The Alerts & Notices link at https://www.fs.usda/gov/r4 as well as the individual forest sites should be examine for the most current information.\n\nTitle 36, Code of Federal Regulations, Chapter II, Subpart B, may close an area to entry or may restrict the use of an area by applying any or all of the prohibitions authorized by the code of regulations. These prohibitions, usually referred to as a forest order, are required to be displayed in [a] manner as to reasonably bring the prohibition to the attention of the public.\nOfficial documentation on this code and its subparts can be found here: https://www.ecfr.gov/cgi-bin/text-idx?SID=e176a90950d0df7817d058c9ba29afd7&mc=true&node=pt36.2.261&rgn=div5#sp36.2.261.b\nIn order to maintain consistency across the region, a workflow has been adopted to facilitate the generation of forest order data. Each forest will maintain a forest order feature class. Through FME workbench, a regional forest order feature class will be updated daily from the forests feature classes via FME scheduler. The regional feature class is driven by the dates in the forests feature classes, which allows for collection of forest orders.\n\nFull metadata can be found at https://www.fs.fed.us/outernet/r4/webmaps/RegionalOffice/FO/FOMetadata.html", "Subject": "A map service showing Forest Orders in the Intermountain Region US Forest Service.", "Category": "", "Version": "2.9.0", "AntialiasingMode": "None", "TextAntialiasingMode": "Force", "Keywords": "Closures,Alerts,R4,Intermountain,Region,Forest,Service,Forest Order,Order,Closure,Restriction" }, "capabilities": "Map,Query,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "datumTransformations": [ { "geoTransforms": [ { "wkid": 108190, "latestWkid": 108190, "transformForward": true, "name": "WGS_1984_(ITRF00)_To_NAD_1983" } ] }, { "geoTransforms": [ { "wkid": 108190, "latestWkid": 108190, "transformForward": false, "name": "WGS_1984_(ITRF00)_To_NAD_1983" } ] } ], "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "mapUnits": {"uwkid": 9001}, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "" }