20250611 21452200 1.0 FALSE BdyPlan_LMP_RecommendedDesignatedArea 002 Geographic GCS_North_American_1983 Angular Unit: Degree (0.017453) GEOGCS["GCS_North_American_1983",DATUM["D_North_American_1983",SPHEROID["GRS_1980",6378137.0,298.257222101]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433],AUTHORITY["EPSG",4269]] -400 -400 999999999.99999988 0 1 0 1 8.98315284119521e-09 0.001 0.001 true -180 4269 4269 20250611 21505400 20250611 21505400 USA Esri ArcGIS 13.3.4.52636 2012 Planning Rule: 36 CFR 219.7(c)(2)(v,vi,vii), 36 CFR 219.10(b)(1), 36 CFR 219.19, Forest Service Planning Handbook associated with 2012 Rule: FSH 1909.12, chapter 24, chapter 70, chapter 80. 1982 Planning Rule. BdyPlan_LMP_RecommendedDesignatedArea USDA Forest Service 2026-04-06T08:20:18 The Land Management Planning Recommended Designated Areas Feature Class provides descriptive and location information about Recommended Designated Areas within the U.S. Forest Service Boundaries, aggregated into one dataset. This includes historical representations of area boundaries. This feature class aspires to represent the geospatial boundaries for land allocations identified in land management plans. Since many plans are out-dated and revised under previous planning rules, liberties were taken to fit current plan data into the new data standards. One must look at the land management plan and plan components for the full management direction and to understand actual management complexities. Contextual Definition: It is required for every National Forest to have a Land Management Plan (LMP), often referred to as a forest plan. A Designated Area is an area or feature identified and managed to maintain its unique special character or purpose. Some categories of designated areas may be designated only by statute and some categories may be established administratively in the land management planning process or by other administrative processes of the Federal executive branch. Examples of statutorily designated areas are national heritage areas, national recreational areas, national scenic trails, wilderness areas, and wilderness study areas. Examples of administratively designated areas are experimental forests, research natural areas, scenic byways, botanical areas, and significant caves. Land management plan decisions may include recommendations to establish additional designated areas. Some designated areas may be formally designated or established concurrently with a plan decision, while others may not. The term "designated area" refers to categories of area or feature established by, or pursuant to, statute, regulation, or policy. Once established the designation continues until a subsequent decision by the appropriate authority removes the designation. Generally, areas that are described in 1909.12, Chapter 20 shall be used in this recommended designated area feature class. The list in Chapter 24, exhibit 01 is not comprehensive. Some plan areas may have unique designations created by special legislation or other administrative action in addition to the types identified in this section. If a land area does not qualify as a designated area or has not been designated, but needs specific guidance, the Responsible Official may identify the area as a management area or as a geographic area to apply specific plan components in the land management plan. Eligible and Suitable Wild and Scenic Rivers will not be used in this recommended designated area feature class. This feature class shows the geospatial extent of each Recommended Designated Area within land management plans, with pertinent metadata and includes data from both the 1982 and 2012 planning rules. This schema can also be used as a template to build data regionally or for individual units. If and when the Recommended Designated Area becomes an official Designated Area then the authoritative data for the Designated Area will be stored in the LSRS designated area layer. Recommended Designated Area definition: Areas with a single unique special character or purpose designated by statue or administratively through regulation, policy or under the land management planning process. Characteristics: - Is labeled as "recommended" or "proposed" AND a Designation type, regardless of a proper noun (i.e. Recommended Wilderness or Ruby Mountains Recommended Wilderness). - Has a single unique special character or purpose and may overlap with different Designated Areas. - May overlap with Geographic and Management Areas. - Not all LMPs include Recommended Designated Areas. However, if an LMP includes a Recommended Designated Area, it must be described in the LMP. - May exist as a single-part or multi-part polygon. - May have plan components or may only be described in the LMP without plan components. USFS Chief Information Office, Enterprise Data Warehouse Please send an e-mail to the address below. Washington DC 20250 US SM.FS.data@usda.gov Archeological Area;Botanical Area;Experimental Forest;Experimental Range;Experimental Research Area;Forest Plan;Geological Area;Historical Area;Land Management Plan;Management Areas;Memorial Area;National Historic Trail;National Monument;National Recreation Trail;National Scenic Trail;Paleontological Area;Planning;Recommended Wilderness;Recreation Area;Recreation Area;Research Natural Area;Scenic Area;Scenic Byway;Significant Caves;Zoological Area;boundaries;environment;planningCadastre boundaries; environment; planningCadastre ISO 19115 Topic Categories The USDA Forest Service makes no warranty, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, nor assumes any legal liability or responsibility for the accuracy, reliability, completeness or utility of these geospatial data, or for the improper or incorrect use of these geospatial data. These geospatial data and related maps or graphics are not legal documents and are not intended to be used as such. The data and maps may not be used to determine title, ownership, legal descriptions or boundaries, legal jurisdiction, or restrictions that may be in place on either public or private land. Natural hazards may or may not be depicted on the data and maps, and users should exercise due caution. The data are dynamic and may change over time. The user is responsible to verify the limitations of the geospatial data and to use the data accordingly. The U.S. Forest Service makes no warranty, express or implied, nor assumes any liability or responsibility for the accuracy, reliability, completeness, or utility of these geospatial data or for the improper or incorrect use of those data. The data are dynamic and may change over time. The user is responsible for verifying the limitations of the geospatial data and for using the data accordingly. 2012 Planning Rule: 36 CFR 219.7(c)(2)(v,vi,vii), 36 CFR 219.10(b)(1), 36 CFR 219.19, Forest Service Planning Handbook associated with 2012 Rule: FSH 1909.12, chapter 24, chapter 70, chapter 80. 1982 Planning Rule. 2026-03-30 1 -122.26602351800001 -72.907157764 49.001041493 31.375247342 000000 ArcGIS Metadata 1.0 USFS Chief Information Office, Enterprise Data Warehouse Please send an e-mail to the address below. Washington DC 20250 US SM.FS.data@usda.gov dataset withheld withheld http://data.fs.usda.gov/geodata/edw/datasets.php Enterprise Geodatabase Feature Class dataset EPSG 6.5(3.0.1) 0 Simple FALSE 0 TRUE FALSE BdyPlan_LMP_RecommendedDesignatedArea Feature Class 0 OBJECTID OBJECTID OID 4 10 0 Internal feature number. Esri Sequential unique whole numbers that are automatically generated. REGION REGION String 200 0 0 FOREST FOREST String 200 0 0 REC_DES_AREA_NAME REC_DES_AREA_NAME String 108 0 0 REC_DES_AREA_TYPE REC_DES_AREA_TYPE String 36 0 0 REC_DES_AREA_DESCRIPTION REC_DES_AREA_DESCRIPTION String 1114 0 0 PLAN_YEAR PLAN_YEAR String 4 0 0 ADMIN_CHANGE ADMIN_CHANGE String 1 0 0 AMENDMENT AMENDMENT String 1 0 0 DOCUMENT_ID DOCUMENT_ID String 84 0 0 PLAN_EDIT_DATE PLAN_EDIT_DATE Double 8 38 8 GIS_ACRES GIS_ACRES Double 8 38 8 REV_DATE REV_DATE String 20 0 0 DATA_SOURCE DATA_SOURCE SmallInteger 2 5 0 ACCURACY ACCURACY SmallInteger 2 5 0 SOURCE_GLOBALID SOURCE_GLOBALID String 200 0 0 TNAME TNAME String 200 0 0 GLOBALID globalid String 200 0 0 SHAPE SHAPE Geometry 8 0 0 Feature geometry. Esri Coordinates defining the features. SHAPE.AREA SHAPE.AREA Double 0 0 0 SHAPE.LEN SHAPE.LEN Double 0 0 0 OBJECTID Internal feature number. Esri Sequential unique whole numbers that are automatically generated. OBJECTID OID 4 10 0 REGION The administrative USFS Region the LMPU resides within. US Forest Service Region Name List REGION String 200 0 0 FOREST The National Forest/Grassland or other Unit the area resides within. This is the administrative unit (not proclaimed) for the forest, grassland or other unit. US Forest Service Forest Name List FOREST String 200 0 0 REC_DES_AREA_NAME The name of the area as classified in the land management plan. US Forest Service Area name REC_DES_AREA_NAME String 108 0 0 REC_DES_AREA_TYPE The type of area as classified in the land management plan. US Forest Service Area code REC_DES_AREA_TYPE String 36 0 0 REC_DES_AREA_DESCRIPTION A description of the purpose of the area and its associated plan content. US Forest Service Area purpose REC_DES_AREA_DESCRIPTION String 1114 0 0 PLAN_YEAR The year that the most recent version of the plan information and geography for this area was published. US Forest Service Version year PLAN_YEAR String 4 0 0 ADMIN_CHANGE Denotes if the feature reflects an administrative change. US Forest Service Y Yes US Forest Service N No US Forest Service ADMIN_CHANGE String 1 0 0 AMENDMENT Denotes if the feature reflects an amendment. US Forest Service Y Yes US Forest Service N No US Forest Service AMENDMENT String 1 0 0 DOCUMENT_ID Document identification number associated with either an amendment or an administrative change or the date or year associated with the administrative change or amendment. Field is intended to connect to a relationship table within FP_DECK that holds additional information about the administrative change or amendment such as the data of decision. US Forest Service Document ID DOCUMENT_ID String 84 0 0 PLAN_EDIT_DATE Date of latest feature update from an administrative change or amendment. When a feature is changed due to an administrative change or amendment populate the date of edit. All features will be the date of the FPR unless modified by an administrative change or amendment. The date for the administrative change or amendment can be found within the document. US Forest Service Latest update date PLAN_EDIT_DATE Double 8 38 8 GIS_ACRES Calculation of the polygonal area representing the parcel, expressed as acres; the value is dependent on the specified map projection and calculated as international acres. US Forest Service GIS acres GIS_ACRES Double 8 38 8 REV_DATE Date of feature creation or latest update. Date was populated based on the date this database was created and does not indicate any changes made by plan revisions. US Forest Service Feature date REV_DATE String 20 0 0 DATA_SOURCE Feature data source code. US Forest Service FS_DataSource List DATA_SOURCE Short 0 5 0 ACCURACY Distance (+/-), in meters, of expected difference between feature and real world object locations. US Forest Service Meters ACCURACY Short 0 5 0 SOURCE_GLOBALID Global ID from the source data. ESRI Automatically generated whole number identifiers SOURCE_GLOBALID String 200 0 0 TNAME This attribute comes from the S_USA.EDW_SDE_SOURCE_CATALOG_V table. It is a combination of the OWNER attribute and the TABLE_NAME attribute. It is required because the ETL runs separately for each TNAME, using it in the WHERE clause against the S_USA.BdyPlan_LandAllocationMapping feature class. EDW Table name TNAME String 200 0 0 GLOBALID Globally Unique Identifier for each feature, managed by ESRI software. ESRI Automatically generated whole number identifiers GLOBALID String 200 0 0 SHAPE.AREA Esri field of boundary area in coordinate system units Esri Esri field of boundary length in coordinate system units SHAPE.AREA Double 0 0 0 SHAPE.LEN Esri field of boundary length in coordinate system units Esri Esri field of boundary length in coordinate system units SHAPE.LEN Double 0 0 0 20250611 000000 ArcGIS Metadata 1.0 USFS Chief Information Office, Enterprise Data Warehouse Please send an e-mail to the address below. Washington DC 20250 US SM.FS.data@usda.gov dataset 20250613 000000 ArcGIS Metadata 1.0 USFS Chief Information Office, Enterprise Data Warehouse Please send an e-mail to the address below. Washington DC 20250 US SM.FS.data@usda.gov dataset USA BdyPlan_LMP_RecommendedDesignatedArea USDA Forest Service 2026-04-06T08:20:18 The Land Management Planning Recommended Designated Areas Feature Class provides descriptive and location information about Recommended Designated Areas within the U.S. Forest Service Boundaries, aggregated into one dataset. This includes historical representations of area boundaries. This feature class aspires to represent the geospatial boundaries for land allocations identified in land management plans. Since many plans are out-dated and revised under previous planning rules, liberties were taken to fit current plan data into the new data standards. One must look at the land management plan and plan components for the full management direction and to understand actual management complexities. Contextual Definition: It is required for every National Forest to have a Land Management Plan (LMP), often referred to as a forest plan. A Designated Area is an area or feature identified and managed to maintain its unique special character or purpose. Some categories of designated areas may be designated only by statute and some categories may be established administratively in the land management planning process or by other administrative processes of the Federal executive branch. Examples of statutorily designated areas are national heritage areas, national recreational areas, national scenic trails, wilderness areas, and wilderness study areas. Examples of administratively designated areas are experimental forests, research natural areas, scenic byways, botanical areas, and significant caves. Land management plan decisions may include recommendations to establish additional designated areas. Some designated areas may be formally designated or established concurrently with a plan decision, while others may not. The term "designated area" refers to categories of area or feature established by, or pursuant to, statute, regulation, or policy. Once established the designation continues until a subsequent decision by the appropriate authority removes the designation. Generally, areas that are described in 1909.12, Chapter 20 shall be used in this recommended designated area feature class. The list in Chapter 24, exhibit 01 is not comprehensive. Some plan areas may have unique designations created by special legislation or other administrative action in addition to the types identified in this section. If a land area does not qualify as a designated area or has not been designated, but needs specific guidance, the Responsible Official may identify the area as a management area or as a geographic area to apply specific plan components in the land management plan. Eligible and Suitable Wild and Scenic Rivers will not be used in this recommended designated area feature class. This feature class shows the geospatial extent of each Recommended Designated Area within land management plans, with pertinent metadata and includes data from both the 1982 and 2012 planning rules. This schema can also be used as a template to build data regionally or for individual units. If and when the Recommended Designated Area becomes an official Designated Area then the authoritative data for the Designated Area will be stored in the LSRS designated area layer. Recommended Designated Area definition: Areas with a single unique special character or purpose designated by statue or administratively through regulation, policy or under the land management planning process. Characteristics: - Is labeled as "recommended" or "proposed" AND a Designation type, regardless of a proper noun (i.e. Recommended Wilderness or Ruby Mountains Recommended Wilderness). - Has a single unique special character or purpose and may overlap with different Designated Areas. - May overlap with Geographic and Management Areas. - Not all LMPs include Recommended Designated Areas. However, if an LMP includes a Recommended Designated Area, it must be described in the LMP. - May exist as a single-part or multi-part polygon. - May have plan components or may only be described in the LMP without plan components. USFS Chief Information Office, Enterprise Data Warehouse Please send an e-mail to the address below. Washington DC 20250 US SM.FS.data@usda.gov Archeological Area;Botanical Area;Experimental Forest;Experimental Range;Experimental Research Area;Forest Plan;Geological Area;Historical Area;Land Management Plan;Management Areas;Memorial Area;National Historic Trail;National Monument;National Recreation Trail;National Scenic Trail;Paleontological Area;Planning;Recommended Wilderness;Recreation Area;Recreation Area;Research Natural Area;Scenic Area;Scenic Byway;Significant Caves;Zoological Area;boundaries;environment;planningCadastre boundaries; environment; planningCadastre ISO 19115 Topic Categories The USDA Forest Service makes no warranty, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, nor assumes any legal liability or responsibility for the accuracy, reliability, completeness or utility of these geospatial data, or for the improper or incorrect use of these geospatial data. These geospatial data and related maps or graphics are not legal documents and are not intended to be used as such. The data and maps may not be used to determine title, ownership, legal descriptions or boundaries, legal jurisdiction, or restrictions that may be in place on either public or private land. Natural hazards may or may not be depicted on the data and maps, and users should exercise due caution. The data are dynamic and may change over time. The user is responsible to verify the limitations of the geospatial data and to use the data accordingly. The U.S. Forest Service makes no warranty, express or implied, nor assumes any liability or responsibility for the accuracy, reliability, completeness, or utility of these geospatial data or for the improper or incorrect use of those data. The data are dynamic and may change over time. The user is responsible for verifying the limitations of the geospatial data and for using the data accordingly. 2012 Planning Rule: 36 CFR 219.7(c)(2)(v,vi,vii), 36 CFR 219.10(b)(1), 36 CFR 219.19, Forest Service Planning Handbook associated with 2012 Rule: FSH 1909.12, chapter 24, chapter 70, chapter 80. 1982 Planning Rule. 2026-03-30 1 -122.26602351800001 -72.907157764 49.001041493 31.375247342 National Dataset 0 This feature class shows a general theme. One must look at the land management plan and plan components for the full management direction and to understand actual management complexities. The land allocation layers reflect the spatial decisions of the plan, they do not necessarily reflect inventories or program inventories. For mapping and analysis purposes, these data should be used in conjunction with other land data such as designated areas, recreation opportunity spectrum, scenic integrity, land ownership, etc. Acreage calculations are dependent on data sources, projections, methods of calculation, and changes in technology. The sources of data have improved with technology like GPS and digital survey equipment. Data projections have changed over the years giving us better measurement of length and area. Map data is almost always measured in a planar projection that yields accurate measurement of area for small areas but returns a less accurate area calculation over large areas because the curvature of the earth is not accounted for in a planar projection. This can cause small area calculations to not always add up to the sum of a larger single area. In some situations, the difference is only fractions of an acre, other times with large areas the difference can be many acres. With this GIS acreage, calculations may vary over time depending on data, projections, and technology. The current GIS area calculations are the best we have with the available data and technology at this time and may not reflect the same exact numbers of past or future calculations. Data completeness of management area reflects the contents of the forest/unit land allocation mapping standard datasets at the time this feature class was created. Specific size of smallest feature that will be reliably mapped. Based on mapping standards for 1:24,000 scale maps +/- 40 feet. For the purposes of this feature class publicaton, the following attributes were added: region, forest/unit, and plan year. Non Forest Service lands were removed from the dataset prior to publication. withheld withheld http://data.fs.usda.gov/geodata/edw/datasets.php 554 Feature class: A collection of geographic features with the same geometry type (such as point, line, or polygon), the same attributes, and the same spatial reference. ESRI GIS Dictionary BdyPlan_LMP_RecommendedDesignatedArea Feature Class 554 OBJECTID Internal feature number. Esri Sequential unique whole numbers that are automatically generated. OBJECTID OID 4 10 0 REGION The administrative USFS Region the LMPU resides within. US Forest Service Region Name List REGION String 200 0 0 FOREST The National Forest/Grassland or other Unit the area resides within. This is the administrative unit (not proclaimed) for the forest, grassland or other unit. US Forest Service Forest Name List FOREST String 200 0 0 REC_DES_AREA_NAME The name of the area as classified in the land management plan. US Forest Service Area name REC_DES_AREA_NAME String 108 0 0 REC_DES_AREA_TYPE The type of area as classified in the land management plan. US Forest Service Area code REC_DES_AREA_TYPE String 36 0 0 REC_DES_AREA_DESCRIPTION A description of the purpose of the area and its associated plan content. US Forest Service Area purpose REC_DES_AREA_DESCRIPTION String 1114 0 0 PLAN_YEAR The year that the most recent version of the plan information and geography for this area was published. US Forest Service Version year PLAN_YEAR String 4 0 0 ADMIN_CHANGE Denotes if the feature reflects an administrative change. US Forest Service Y Yes US Forest Service N No US Forest Service ADMIN_CHANGE String 1 0 0 AMENDMENT Denotes if the feature reflects an amendment. US Forest Service Y Yes US Forest Service N No US Forest Service AMENDMENT String 1 0 0 DOCUMENT_ID Document identification number associated with either an amendment or an administrative change or the date or year associated with the administrative change or amendment. Field is intended to connect to a relationship table within FP_DECK that holds additional information about the administrative change or amendment such as the data of decision. US Forest Service Document ID DOCUMENT_ID String 84 0 0 PLAN_EDIT_DATE Date of latest feature update from an administrative change or amendment. When a feature is changed due to an administrative change or amendment populate the date of edit. All features will be the date of the FPR unless modified by an administrative change or amendment. The date for the administrative change or amendment can be found within the document. US Forest Service Latest update date PLAN_EDIT_DATE Double 8 38 8 GIS_ACRES Calculation of the polygonal area representing the parcel, expressed as acres; the value is dependent on the specified map projection and calculated as international acres. US Forest Service GIS acres GIS_ACRES Double 8 38 8 REV_DATE Date of feature creation or latest update. Date was populated based on the date this database was created and does not indicate any changes made by plan revisions. US Forest Service Feature date REV_DATE String 20 0 0 DATA_SOURCE Feature data source code. US Forest Service FS_DataSource List DATA_SOURCE Short 0 5 0 ACCURACY Distance (+/-), in meters, of expected difference between feature and real world object locations. US Forest Service Meters ACCURACY Short 0 5 0 SOURCE_GLOBALID Global ID from the source data. ESRI Automatically generated whole number identifiers SOURCE_GLOBALID String 200 0 0 TNAME This attribute comes from the S_USA.EDW_SDE_SOURCE_CATALOG_V table. It is a combination of the OWNER attribute and the TABLE_NAME attribute. It is required because the ETL runs separately for each TNAME, using it in the WHERE clause against the S_USA.BdyPlan_LandAllocationMapping feature class. EDW Table name TNAME String 200 0 0 GLOBALID Globally Unique Identifier for each feature, managed by ESRI software. ESRI Automatically generated whole number identifiers GLOBALID String 200 0 0 SHAPE.AREA Esri field of boundary area in coordinate system units Esri Esri field of boundary length in coordinate system units SHAPE.AREA Double 0 0 0 SHAPE.LEN Esri field of boundary length in coordinate system units Esri Esri field of boundary length in coordinate system units SHAPE.LEN Double 0 0 0 EPSG 6.12(3.0.1) FGDC Content Standard for Digital Geospatial Metadata FGDC-STD-001-1998